application of the surface and environment The plaster plate installation procedures should be completed before using DERZONAT Application temperature should be between +5 and +40 °C There should not be air flow and air circulation in the environment during the application. application 5,5-6 liters of water is poured down into the mixture bowl; 10 kgs of DERZONAT plaster is added by sprinkling into water. It is awaited for a period of approximately 2-3 minutes in order to cause the plaster to absorb the water. It is mixed with a hand mixer or with the help of a trowel in order to obtain a homogenous mixture. If self-adhesive seam band is to be used the first layer of application is made after affixing the band. If self-adhesive seam band is not to be used, the first layer of DERZONAT is applied in such a way to fill the joints of the seam and seam band is afficed, and then the second layer of application is made. After DERZONAT dried, checking is made if necessary. storage At most 20 bags should be stockpiled one on another at a dry place. The bags must not be in contact with the floor and they must be protected from humidity and condensation. It must be used within 6 months after production date.
