surface and environmental conditions It should be free of dirty material such as dust, oil and paint. The surfaces such as extremely dry, hot and highly absorbent should be moisturized with water. The surfaces of the ceiling should be roughened before applying the plaster or undercoated with material to ensure attachment of the mortar. It should be paid attention that there is no air flow and circulation in the environment during application. The application temperature should be between +5 to +40 °C. application Appropriate amount of plaster is prepared 5,0-5,5 liters of water/ 10 kg MAKONAT proportion in the plastering machine. Mortar is sprayed on the surface by machine. The application thickness is determined with the help of lath according to the smoothness of the surface. The mortar is flatted through surface finishing When the surface starts hardening, it is flatted with the help of a steel trowel. When a light presure is applied on the surface, if it does not subside, trifilling can be started. After trifiling process, polishing is made again with a steel trowel and surface is made ready for painting. storage At most 15 bags should be stockpiled one on another at a dry place. The bags must not be in contact with the floor and they must be protected from humidity and condensation. It must be used within 6 months after production date.
