Single component, cold applied, bitumen solution based waterproofing material. Application Areas When applied on side surfaces of buildings it repels water and humidity, preventing any swelling deformation of paint. It prevents blistering paint corrosion and growth of mold on interior walls. Used for preventing moisture on the floors and walls of foundations and basements. Used as primer before bituminous coatings in basement and roof insulations. It prevents unnecessary use of hot bitum on concrete surfaces. It forms a waterproof layer when used with glass tissue, netting and bituminous cardboard. SIMPOLAX prevents decaying on vehicles when applied on metal surfaces in contact with water. Features It prevents corrosion when used on metal surfaces under or above the ground. Application surfaces should be dry and free of dust, dirt, rust and oil. It is either applied directly on applied surfaces with a brush after mixing with gas or thinner, when required. If application is to be made in doors, precautions should be taken to ensure sufficient ventilations. Should not be used at rainy weather conditions and temperature should not be less than +5°C. Application Cold application. Should be used without heating. Strongly adheres to the application surface and forms a waterproof layer on the surfaces. Starts to dry in 20 minutes after application. It repels water and humidity. Consumption Depending on the porosity of the surface of application, averagely 400 gr/m2 Packaging Presented in 17 kg (net) tin packages Storage Should be stored at covered places (between 5 -30°C) and in upright position.
