Rubberised bituminous solution based, single component, black colour protective liquid solution. Application Areas Due to its elastomeric additives highly flexible and covering. Strongly adheres to the applied surface. Resistant to atmospherics conditions and air pollution. Color is black. Features Due to its elastomeric additives highly flexible and covering. Strongly adheres to the applied surface. Resistant to atmospherics conditions and air pollution. Color is black. Packing: Presented in 17 kg (net) tin packages. Storage Should be stored at covered places (between 5 -30°C) and in upright position Application High elasticity and capability of bridging cracks. It can be applied on dry and wet surfaces. The application surface should be free of dust, dirt, rust and oil and loose parts scraped. Pointed tips and sharp corners should be rounded. The corners and edges should be rounded. The ensure a good adherence to surface before application, water based Standart primer should be used. Could be applied with brush or roll to the surface. Should not be used at rainy weather conditions and temperature should not be less than +5°C Should be applied in two layer and after the first layer curing the second layer should be applied. During the curing period, should not be walked on the application area, and no load applied. Depending the application area size, should be used together with glass tissue.
