PL02 / ULTRA ELASTIC , HIGH UV RESISTANT , CEMENT BASED WATERPROOFING , 2 COMPONENT TDS – TECHNICAL DATA SHEET Description of Product It is a high adhesion, UV resistant, copolymer, extra elastic, cement added waterproofing material. Using Areas Reinforced concrete and screed terraces Hidden roofs, gutters Concrete and iron drinking water tanks Olive well warehouses Hot and cold thermal pools Elevator Spaces Sewage and waste water treatment plants Reinforced concrete pipes and tunnels Vehicle and pedestrian traffic, open or closed parking lots Negative (inside) applications on basement-foundation curtain concrete walls with water pressure Foundations and walls exposed to sea water Closing fine capillary cracks that do not have static mobility in reinforced concrete structures. It is used to provide resistance and impermeability against plant roots in garden terraces. Specifications • The layer formed after drying has expansion ability. • High resistance against UV-lights. • It is full elastic. • Provides diffusion control by condensing water vapor. • Resistant against human and vehicle traffic. • Suitable to contact with drinking water. • Can be applied on horizontal and vertical surfaces. Preparation of surface • In should be cleaned all remnants such as every dirt, dust, oil, poor and loose particles, rising and swelling old applications, paint of old coatings, sherbet of cement etc. on surface before starting application. • Tools such as sweeper, brush, spatula etc. can be used according to necessary cleaning for surface. • The surface should be primed or leveled to obtain a firm surface. • Repair-Protection Mortar should be used for repairing and filling gaps and cavities on surface. • Molumer PL02 should not be applied on wet surface. It’s possible to apply on humid surface. Reference Standard • Market No. 10.300.2173 • Item No 15.270.1001 - 15.270.1001 - 15.270.1007 - 15.270.1001 • TS EN 14891: April 2017 • Cement-Based Liquid Applied Waterproof Product Resistant to Contact with Chlorinated Water TYPE: CMP • Egean University Report Date: 21.04.2008 - Report No: 2008/460 Conditions of application Newly applied material should be protected from frost and rain. On newly poured screeds, application should be done after waiting for at least 21 days. However, in screeds made with Molumer Concrete Admixtures, application can be made after 7-10 days depending on the air temperature.Temperature of surface and platform should be minimum + 5°C and maximum +35°C. Waiting period between layers: 8 hours at 10°C., ˷ 4 hours at 20°C.,˷ 2 hours at 30°C. Expenditure Expenditure changes depending on the surface condition, application thickness, losses such as shedding and cavity. Average Expenditure 1,65-2,75 kg/m2 For the first stage : ˷ 800 gr/m2 For 2. Stage : ˷ 800 gr/m2 For 3. Stage : ˷ 800 gr/m2 Manner of Application After Mix A is prepared (mixed by adding 3 kg of water for 6 kg of Mix A), it is poured into a bucket and made ready for application. A maximum of 3 kg of water can be added to the mixture prepared for more comfortable application in hot weather. It can be mixed with a low-speed (up to 500 rpm) mechanical mixer in the package. Continue stirring until the mixture without lumps is obtained. The mixing time is ~5 minutes. Surfaces such as dusty, burnt, moss-repelled concrete and screed are primed with Molumer PL03 or PL302. A carrier mesh is laid on the drying surface and Molumer PL02 is applied on it. Molumer Geo Chamfer Band is laid on ceramic, bitumen, asphalt, membrane surfaces and Molumer PL05N or Molumer PL05N-01 is applied. After drying, Molumer PL02 is applied. Application Equipment Only the insulation brush is used in the application. The tools and equipment used should be cleaned with water and thinner. Molumer PL02 can only be mechanically cleaned from the surface after drying and hardening. SAFETY RECOMMENDATIONS • Material mixture should be made in the open field and with a mask. Air circulation should be ensured in indoor applications. During the application, work clothes, protective gloves and glasses in accordance with the occupational and occupational health rules should be used. In case of splashing on the eyes and skin, immediately wash it off with clean water. In case of ingestion, a doctor should be consulted immediately. It should be stored out of the reach of children. Please apply to Molumer for the material safety form (MSDS) for the products. Color: It is the white liquid that becomes transparent. Gray color is provided with Mix A. pH: 8±1 Density of the mixture:1,38 ± 0,05 kg/lt Viscosity:17000±4000 cps Packaging Type: 24 kg set (18 kg Plastic Bucket + Mix A 6 kg Sachet) Storage : In a cool and dry environment, it should be stacked and stored as maximum 3 pieces in a row, protecting it from direct sunlight and frost. In the event that the entire product cannot be used, the bucket lid must be tightly closed for the next use and the product must be prevented from airing. The storage life is 1 year from the date of manufacture. 16 IZOTAS IZOLASYON TUR. SAN VE TIC. LTD. STI Inonu Mah. Fatih Sultan Cad. No:40 Ayrancilar Torbali IZMIR TS EN 14891: June 2012 Contact with Chlorinated Water Resistant Cement Based Waterproof Product Applied in Liquid Form CMP Initial tensile adhesion force: 1,2 N/mm2 Tensile adhesion force after contact with water: 0,5 N/mm2 Tensile adhesion force after thermal aging: 1,2 N/mm2 Tensile adhesion force after contact with lime water: 0,6 N/mm2 Tensile adhesion force after freeze-thaw cycle: 0,8 N/mm2 Waterproof: 10,3 gr. no penetration Crack bridging ability: 0,757 mm LEGAL NOTES Information provided about Molumer products, recommendations on their application and use; The experience we have about the situations where the products are stored, protected and applied correctly is given with knowledge, experience and good faith. Molumer products provide assurance to users against production defects. This assurance is for product quality.The application surfaces and application areas of the products are diverse. Therefore, when using Molumer products, make sure that you apply the right product, under the right conditions, in the right way and in the right place. Otherwise, Molumer is not responsible for the damages that may occur and for the application errors caused by lack of information. The business owner, representative or contractor is responsible for checking the suitability of the products for their intended use. It is the responsibility of users to provide up-to-date product information sheets. For this reason, users should take into account the publication date, revision number and revision date in the product sheets. Recently published product sheets and catalogs override previous publications. You can visit our website for the current brochure. In colored products, there may be tonal differences between production batches PL02 / WATERPROOFING WITH ULTRA ELASTIC, UV FILTER, CEMENT ADDITIVE 2K MATERIAL SAFETY DATA SHEET Has been prepared in accordance with the Directive 91/155 / EC of the European Union and its amendments (93/112 / EC, 2001/58 / EC) and the Communiqué on Procedures and Principles for the Preparation of Safety Data Sheets numbered 24692 on 11/03/2002. The European Union directive 91/155/EC and its amendments (93/112/EC,2001/58/EC) have been prepared in accordance with the Communiqué on Procedures and Principles for the Regulation of Safety Data Sheets dated 11/03/2002 and numbered 24692. 1.IDENTIFICATION OF THE PRODUCT AND THE COMPANY Product Name: MOLUMER PL02 – Ultra Elastic, UV Filtered Cement Doped Liquid Membrane Places of Use: Negative (internal) applications in terraces on reinforced concrete and screed, hidden roofs, concrete and iron drinking water tanks in stream gutters, olive well tanks, hot and cold thermal pools, elevator shafts, sewage and waste water treatment plants, reinforced concrete pipes and tunnels, open or closed parking lots for vehicle and pedestrian traffic, basement-foundation curtain concrete walls with water pressure, It is used in the closure of thin capillary cracks without static mobility in foundations and walls exposed to sea water, reinforced concrete structures, in garden terraces to provide resistance and impermeability to plant roots. Manufacturer: Izotas Izolasyon Tur. Sanayi ve Ticaret LTD STI. Inonu Mah. F.Sultan Cad.No: 40 Ayrancilar -Torbali / Izmir / Türkiye Phone: +902328547113 Fax: +902328547114 Giving information about safety: R&D Department E-mail address of the authorized person: info@molumer.com 2. DESCRIPTION OF HAZARDS This assessment is based on current knowledge on similar products. Classification by regulation (EC) No 1272/2008 • GHS07 Exclamation mark • Skin Sens. 1 H317 May cause an allergic skin reaction. Classification according to Directif 67/548/EEC or Directif 1999/45/EC • Xi; Irritant • R37/38; Irritant to the respiratory tract and skin • R41; Risk of damage to the eye • R43; Increased sensitivity with contact with the skin • S24/25; Avoid contact with eyes and skin. • S20; In case of contact with eyes, immediately wash it off with plenty of water and consult a doctor. • S37/39; Use the appropriate hand and protect the eyes/face. Other hazards : None 3.INFORMATION ABOUT COMPONENTS/INGREDIENTS Composition: Cement-doped styrene acrylic based copolymer Components Cas-no EC index-no Classification 67/548/EEC Xi does not need acrylic copolymer; R36/38 Quartz 14808-60-7 238-878-4 Unclassified 4.FIRST AID MEASURES Symptoms and Effects: Medical intervention should be sought in any suspicious situation or symptom that may occur. If unconscious, do not give anything by mouth. If Inhaled: The person should be taken to fresh air, kept warm and rested. If there is a danger of loss of consciousness, the position should be maintained and medical help should be sought. In Contact with Eyes: Immediately wash off with clean water for 5-10 minutes. Seek medical attention by keeping the eyelids open. In contact with skin: Remove contaminated clothing. Wash the skin with soap and water or clean it with appropriate skin cleansers. Do not use solvent thinner and solvent. If Swallowed: If swallowed, seek immediate medical attention. Do not vomit.Rinse the mouth with water and sip the water little by little. 5.FIRE FIGHTING MEASURES Fire extinguishing agents: Alcohol-resistant foam, carbon dioxide, dry chemical powder, water in the form of fog are recommended. . Do not use water in jet form. There are no particularly inappropriate firefighting equipment. Hazards and advice: Avoid inhaling gases such as carbon dioxide and carbon monoxide, which are caused by chemical degradation during combustion. Prevent waste transported by water intervention during quenching from mixing with sewage and soil. 6.PRECAUTIONS AGAINST ACCIDENTAL SPREAD Personal precautions, protective equipment and emergency procedures: Remove unnecessary people from the field. Do not inhale steam. Avoid eye and skin contact. Environmental precautions: Prevent contamination with sewage/surface water/groundwater. Collection and cleaning measures and materials: Impregnate with liquid binder material (Sand, diatomite, general binder, saw sawdust in flour form). Ensure adequate ventilation. 7. USAGE AND STORAGE Safe Handling: Provide adequate ventilation at the place of use. Keep container covers closed when in use. Food and drink are not suitable where the product is used. Secure Storage: There are no special incompatibilities in normal storage conditions. 8. EXPOSURE CONTROLS / PERSONAL PROTECTION The product does not contain significant quantities of substances with limit values that must be controlled and related to the site being studied. Process Conditions: Provide eyewash shop. Technical measures: Provide adequate ventilation. Respiratory apparatus: If ventilation is insufficient, suitable respiratory protection must be present. Hand protection: Protective nitrile or butyl rubber, use long gloves Eye Protection: Use protective eyewear despite liquid splashes. Other protection measures: Protective clothing should be worn. After finishing work, remove contaminated clothing and wash thoroughly with soap and water. 9. PHYSICAL AND CHEMICAL PROPERTIES Appearance: Dirty white high viscosity liquid. Odor: Slight acrylic pH: 8.0 ± 1 Density: 1,42 ± 0,05 kg / lt Viscosity: 1700 ± 4000 cps Boiling Point: Not Determined Flash Point: Not Specified / Not self-leveling Flammability: Not applicable Explosiveness Feature: No explosion hazard Steam pressure: can not be detected Solubility in Water: Mixable every time Resolution in Oil: Not Detected Distribution Coefficient: Can not be determined Vapor Density: 1 Evaporation Rate:
